2022 Hight quality forest fire suit

"Protective Clothing - Forest Fire Protection Clothing" (GB/T 33536-2017) is a Chinese national standard implemented on February 28, 2017, under the jurisdiction of the National Forest Fire Protection Standardization Technical Committee. [1] 
"Protective Clothing - Forest Fireproof Clothing" (GB/T 33536-2017) specifies the technical requirements, test methods, inspection rules and markings of forest fireproof clothing. This standard applies to protective clothing worn by personnel engaged in forest fire fighting operations. This standard does not apply to flame retardant protective clothing used in urban fire rescue.

1. After each use, check the condition of the Heat Resistant Suit, focusing on checking for wear. 2. If you want to remove the residual dirt on the fireproof clothing, use tap water and neutral soap, and use detergent if necessary. Use the detergent only on the contaminated parts, be careful, because the detergent may damage the aluminized surface. 3. If the fireproof clothing has been in contact with chemicals, or bubbles are found, the entire aluminized surface should be cleaned. If oil or grease residues remain on the fireproof clothing, wash it with neutral soap. 4. The fireproof clothing must be thoroughly dried before re-storing, and it is best not to fold it after drying. 5. If there is a small area of burn marks or wear on the surface of the fireproof suit, it can be repaired with an aluminized spray gun. If the exterior of the fireproof suit is damaged, replace the fireproof suit.

1. Forest Fire Helmet Orange color, using permanent pure cotton flame retardant fabric, the fabric reaches the European standard export standard, using pure cotton fabric, after flame retardant treatment, the effect is good.
2. The fabric used meets the national flame retardant protective clothing GB8965-1998 standard
3. It is made of C12×16 pure cotton flame retardant yarn card with strong washing resistance and strong washing resistance in the world.
4. There is a "forest fire prevention" sign on the back, a forest fire protection sign and a striking luminous strip to ensure the night visibility of firefighters
5. After washing 50 times, it can maintain the national flame retardant standard, and the smoldering and afterburning time can reach within 2 seconds.
6. Hooks and buckles are used to facilitate connection and release. The buckles and hooks are non-flammable and non-melting. The key parts are overlocked and sewn twice;
7. The trouser legs are covered with cowhide to prevent being torn by bushes and thorns, and the underarms and crotch are double-lined. On the body cover, there is enough overlapping knees and other parts between the pants and additional fabrics to enhance the firmness.
8. Double-layer design: the shoulders are double-layered, so that players can increase the protection of the shoulders when carrying tools and equipment on their backs; the legs are double-layered, which can be filled with spacers
Thermal material to reduce heat conduction, suitable for wind extinguisher crew members.
9. The top is designed with copper buckles and hooks, which is convenient to put on and take off, saving time.
10. The jacket has armbands, chest strips, and the words "Forest Fire" on the back, which is highly iconic and highlights the characteristics of the industry. The collar is stand-up and can be integrated with the helmet cape for protection.
11. Reflective cloth is added to the prominent position of the fire-fighting suit for easy identification and positioning.